# Makefile.in generated by automake 1.16.2 from Makefile.am. # @configure_input@ # Copyright (C) 1994-2020 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ # $Source: bitbucket.org:berkeleylab/gasnet.git/Makefile.am $ # Description: Makefile for GASNet # Copyright 2002, Dan Bonachea # Terms of use are as specified in license.txt VPATH = @srcdir@ am__is_gnu_make = { \ if test -z '$(MAKELEVEL)'; then \ false; \ elif test -n '$(MAKE_HOST)'; then \ true; \ elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ true; \ else \ false; \ fi; \ } am__make_running_with_option = \ case $${target_option-} in \ ?) ;; \ *) echo "am__make_running_with_option: internal error: invalid" \ "target option '$${target_option-}' specified" >&2; \ exit 1;; \ esac; \ has_opt=no; \ sane_makeflags=$$MAKEFLAGS; \ if $(am__is_gnu_make); then \ sane_makeflags=$$MFLAGS; \ else \ case $$MAKEFLAGS in \ *\\[\ \ ]*) \ bs=\\; \ sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ esac; \ fi; \ skip_next=no; \ strip_trailopt () \ { \ flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ }; \ for flg in $$sane_makeflags; do \ test $$skip_next = yes && { skip_next=no; continue; }; \ case $$flg in \ *=*|--*) continue;; \ -*I) strip_trailopt 'I'; skip_next=yes;; \ -*I?*) strip_trailopt 'I';; \ -*O) strip_trailopt 'O'; skip_next=yes;; \ -*O?*) strip_trailopt 'O';; \ -*l) strip_trailopt 'l'; skip_next=yes;; \ -*l?*) strip_trailopt 'l';; \ -[dEDm]) skip_next=yes;; \ -[JT]) skip_next=yes;; \ esac; \ case $$flg in \ *$$target_option*) has_opt=yes; break;; \ esac; \ done; \ test $$has_opt = yes am__make_dryrun = (target_option=n; $(am__make_running_with_option)) am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkglibexecdir = $(libexecdir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = @build@ host_triplet = @host@ target_triplet = @target@ subdir = . ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/other/plpa/config/acinclude.m4 \ $(top_srcdir)/acinclude.m4 $(top_srcdir)/configure.in am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \ $(am__configure_deps) $(include_HEADERS) $(am__DIST_COMMON) am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ configure.lineno config.status.lineno mkinstalldirs = $(SHELL) $(top_srcdir)/config-aux/mkinstalldirs CONFIG_HEADER = gasnet_config.h CONFIG_CLEAN_FILES = tests/Makefile CONFIG_CLEAN_VPATH_FILES = am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; am__vpath_adj = case $$p in \ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ *) f=$$p;; \ esac; am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; am__install_max = 40 am__nobase_strip_setup = \ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` am__nobase_strip = \ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" am__nobase_list = $(am__nobase_strip_setup); \ for p in $$list; do echo "$$p $$p"; done | \ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ if (++n[$$2] == $(am__install_max)) \ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ END { for (dir in files) print dir, files[dir] }' am__base_list = \ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' am__uninstall_files_from_dir = { \ test -z "$$files" \ || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ $(am__cd) "$$dir" && rm -f $$files; }; \ } am__installdirs = "$(DESTDIR)$(libdir)" "$(DESTDIR)$(configdir)" \ "$(DESTDIR)$(includedir)" LIBRARIES = $(lib_LIBRARIES) ARFLAGS = cru AM_V_AR = $(am__v_AR_@AM_V@) am__v_AR_ = $(am__v_AR_@AM_DEFAULT_V@) am__v_AR_0 = @echo " AR " $@; am__v_AR_1 = libgasnet_tools_par_a_AR = $(AR) $(ARFLAGS) libgasnet_tools_par_a_LIBADD = am_libgasnet_tools_par_a_OBJECTS = libgasnet_tools_par_a_OBJECTS = $(am_libgasnet_tools_par_a_OBJECTS) libgasnet_tools_seq_a_AR = $(AR) $(ARFLAGS) libgasnet_tools_seq_a_LIBADD = am_libgasnet_tools_seq_a_OBJECTS = libgasnet_tools_seq_a_OBJECTS = $(am_libgasnet_tools_seq_a_OBJECTS) AM_V_P = $(am__v_P_@AM_V@) am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) am__v_P_0 = false am__v_P_1 = : AM_V_GEN = $(am__v_GEN_@AM_V@) am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) am__v_GEN_0 = @echo " GEN " $@; am__v_GEN_1 = AM_V_at = $(am__v_at_@AM_V@) am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) am__v_at_0 = @ am__v_at_1 = DEFAULT_INCLUDES = -I.@am__isrc@ COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) AM_V_CC = $(am__v_CC_@AM_V@) am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@) am__v_CC_0 = @echo " CC " $@; am__v_CC_1 = CCLD = $(CC) LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@ AM_V_CCLD = $(am__v_CCLD_@AM_V@) am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@) am__v_CCLD_0 = @echo " CCLD " $@; am__v_CCLD_1 = SOURCES = $(libgasnet_tools_par_a_SOURCES) \ $(libgasnet_tools_seq_a_SOURCES) DIST_SOURCES = $(libgasnet_tools_par_a_SOURCES) \ $(libgasnet_tools_seq_a_SOURCES) RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \ ctags-recursive dvi-recursive html-recursive info-recursive \ install-data-recursive install-dvi-recursive \ install-exec-recursive install-html-recursive \ install-info-recursive install-pdf-recursive \ install-ps-recursive install-recursive installcheck-recursive \ installdirs-recursive pdf-recursive ps-recursive \ tags-recursive uninstall-recursive am__can_run_installinfo = \ case $$AM_UPDATE_INFO_DIR in \ n|no|NO) false;; \ *) (install-info --version) >/dev/null 2>&1;; \ esac DATA = $(config_DATA) HEADERS = $(include_HEADERS) RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ distclean-recursive maintainer-clean-recursive am__recursive_targets = \ $(RECURSIVE_TARGETS) \ $(RECURSIVE_CLEAN_TARGETS) \ $(am__extra_recursive_targets) AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \ cscope distdir distdir-am dist dist-all distcheck am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) \ gasnet_config.h.in # Read a list of newline-separated strings from the standard input, # and print each of them once, without duplicates. Input order is # *not* preserved. am__uniquify_input = $(AWK) '\ BEGIN { nonempty = 0; } \ { items[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in items) print i; }; } \ ' # Make sure the list of sources is unique. This is necessary because, # e.g., the same source file might be shared among _SOURCES variables # for different programs/libraries. am__define_uniq_tagged_files = \ list='$(am__tagged_files)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | $(am__uniquify_input)` ETAGS = etags CTAGS = ctags CSCOPE = cscope am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/gasnet_config.h.in \ $(top_srcdir)/config-aux/compile \ $(top_srcdir)/config-aux/config.guess \ $(top_srcdir)/config-aux/config.sub \ $(top_srcdir)/config-aux/install-sh \ $(top_srcdir)/config-aux/missing \ $(top_srcdir)/config-aux/mkinstalldirs \ $(top_srcdir)/tests/Makefile.in ChangeLog README acconfig.h DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) distdir = $(PACKAGE)-$(VERSION) top_distdir = $(distdir) am__remove_distdir = \ if test -d "$(distdir)"; then \ find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \ && rm -rf "$(distdir)" \ || { sleep 5 && rm -rf "$(distdir)"; }; \ else :; fi am__post_remove_distdir = $(am__remove_distdir) am__relativize = \ dir0=`pwd`; \ sed_first='s,^\([^/]*\)/.*$$,\1,'; \ sed_rest='s,^[^/]*/*,,'; \ sed_last='s,^.*/\([^/]*\)$$,\1,'; \ sed_butlast='s,/*[^/]*$$,,'; \ while test -n "$$dir1"; do \ first=`echo "$$dir1" | sed -e "$$sed_first"`; \ if test "$$first" != "."; then \ if test "$$first" = ".."; then \ dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ else \ first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ if test "$$first2" = "$$first"; then \ dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ else \ dir2="../$$dir2"; \ fi; \ dir0="$$dir0"/"$$first"; \ fi; \ fi; \ dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ done; \ reldir="$$dir2" DIST_ARCHIVES = $(distdir).tar.gz GZIP_ENV = --best DIST_TARGETS = dist-gzip distuninstallcheck_listfiles = find . -type f -print am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \ | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$' distcleancheck_listfiles = find . -type f -print ACLOCAL = @ACLOCAL@ ADDR2LINE_PATH = @ADDR2LINE_PATH@ ALLOCA = @ALLOCA@ AMTAR = @AMTAR@ AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ APRUN_PATH = @APRUN_PATH@ AR = @AR@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ BASENAME = @BASENAME@ BOURNE_SHELL = @BOURNE_SHELL@ BUILD_ID = @BUILD_ID@ BUILD_IS_SRC = @BUILD_IS_SRC@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CC_FAMILY = @CC_FAMILY@ CC_SUBFAMILY = @CC_SUBFAMILY@ CFLAGS = @CFLAGS@ COMPLETE_INTTYPES_H = @COMPLETE_INTTYPES_H@ COMPLETE_STDINT_H = @COMPLETE_STDINT_H@ COMPLETE_SYS_TYPES_H = @COMPLETE_SYS_TYPES_H@ CONDUITS = @CONDUITS@ CONFIGURE_ARGS = @CONFIGURE_ARGS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CROSS_COMPILING = @CROSS_COMPILING@ CUDA_UVA_CFLAGS = @CUDA_UVA_CFLAGS@ CUDA_UVA_LDFLAGS = @CUDA_UVA_LDFLAGS@ CUDA_UVA_LIBS = @CUDA_UVA_LIBS@ CUDA_guess_prog = @CUDA_guess_prog@ CXX = @CXX@ CXXCPP = @CXXCPP@ CXXDEPMODE = @CXXDEPMODE@ CXXFLAGS = @CXXFLAGS@ CXX_FAMILY = @CXX_FAMILY@ CXX_SUBFAMILY = @CXX_SUBFAMILY@ CYGPATH_W = @CYGPATH_W@ DBX_PATH = @DBX_PATH@ DEBUGMALLOC = @DEBUGMALLOC@ DEBUGMALLOC_VAL = @DEBUGMALLOC_VAL@ DEBUGMALLOC_VAR = @DEBUGMALLOC_VAR@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ DEVWARN_CFLAGS = @DEVWARN_CFLAGS@ DEVWARN_CXXFLAGS = @DEVWARN_CXXFLAGS@ DEVWARN_MPI_CFLAGS = @DEVWARN_MPI_CFLAGS@ DIRNAME = @DIRNAME@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ ENVCMD = @ENVCMD@ EXEEXT = @EXEEXT@ EXESUFFIX = @EXESUFFIX@ FH_CFLAGS = @FH_CFLAGS@ GASNETI_HWLOC_BIND_PATH = @GASNETI_HWLOC_BIND_PATH@ GASNETI_HWLOC_CALC_PATH = @GASNETI_HWLOC_CALC_PATH@ GASNETI_PTR_BITS = @GASNETI_PTR_BITS@ GASNET_EXTRA_DEFINES = @GASNET_EXTRA_DEFINES@ GASNET_IBV_SPAWNER_CONF = @GASNET_IBV_SPAWNER_CONF@ GASNET_INSTALL_CMD = @GASNET_INSTALL_CMD@ GASNET_OFI_SPAWNER_CONF = @GASNET_OFI_SPAWNER_CONF@ GASNET_OPT_CFLAGS = @GASNET_OPT_CFLAGS@ GASNET_OPT_CXXFLAGS = @GASNET_OPT_CXXFLAGS@ GASNET_PERL_BYTESFLAG = @GASNET_PERL_BYTESFLAG@ GASNET_PERL_LANG = @GASNET_PERL_LANG@ GASNET_PLATFORM = @GASNET_PLATFORM@ GASNET_PSHM_CFLAGS = @GASNET_PSHM_CFLAGS@ GASNET_PSHM_ENABLED = @GASNET_PSHM_ENABLED@ GASNET_PSHM_LDFLAGS = @GASNET_PSHM_LDFLAGS@ GASNET_PSHM_LIBS = @GASNET_PSHM_LIBS@ GASNET_THREAD_DEFINES = @GASNET_THREAD_DEFINES@ GASNET_THREAD_LIBS = @GASNET_THREAD_LIBS@ GASNET_UCX_SPAWNER_CONF = @GASNET_UCX_SPAWNER_CONF@ GASNET_UDP_LIBS = @GASNET_UDP_LIBS@ GDB_PATH = @GDB_PATH@ GMAKE = @GMAKE@ GNI_CFLAGS = @GNI_CFLAGS@ GNI_LDFLAGS = @GNI_LDFLAGS@ GNI_LIBS = @GNI_LIBS@ GREP = @GREP@ GSTACK_PATH = @GSTACK_PATH@ HAVE_INTTYPES_H = @HAVE_INTTYPES_H@ HAVE_STDINT_H = @HAVE_STDINT_H@ HAVE_SYS_TYPES_H = @HAVE_SYS_TYPES_H@ HIP_CFLAGS = @HIP_CFLAGS@ HIP_LDFLAGS = @HIP_LDFLAGS@ HIP_LIBS = @HIP_LIBS@ HIP_guess_prog = @HIP_guess_prog@ HWLOC_CFLAGS = @HWLOC_CFLAGS@ HWLOC_LDFLAGS = @HWLOC_LDFLAGS@ HWLOC_LIBS = @HWLOC_LIBS@ HWLOC_guess_prog = @HWLOC_guess_prog@ IBV_CFLAGS = @IBV_CFLAGS@ IBV_LDFLAGS = @IBV_LDFLAGS@ IBV_LIBS = @IBV_LIBS@ IBV_guess_prog = @IBV_guess_prog@ IDB_PATH = @IDB_PATH@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ INTTYPES_DEFINES = @INTTYPES_DEFINES@ KEEPTMP_CFLAGS = @KEEPTMP_CFLAGS@ LDFLAGS = @LDFLAGS@ LIBGCC = @LIBGCC@ LIBM = @LIBM@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LLDB_PATH = @LLDB_PATH@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ MAKEINFO = @MAKEINFO@ MISC_CFLAGS = @MISC_CFLAGS@ MISC_CPPFLAGS = @MISC_CPPFLAGS@ MISC_CXXFLAGS = @MISC_CXXFLAGS@ MKDIR_P = @MKDIR_P@ MPIRUN_CMD = @MPIRUN_CMD@ MPI_CC = @MPI_CC@ MPI_CC_FAMILY = @MPI_CC_FAMILY@ MPI_CC_SUBFAMILY = @MPI_CC_SUBFAMILY@ MPI_CFLAGS = @MPI_CFLAGS@ MPI_LIBS = @MPI_LIBS@ NM = @NM@ NOASLR_LDFLAGS = @NOASLR_LDFLAGS@ OBJEXT = @OBJEXT@ OFI_CFLAGS = @OFI_CFLAGS@ OFI_LDFLAGS = @OFI_LDFLAGS@ OFI_LIBS = @OFI_LIBS@ OFI_guess_prog = @OFI_guess_prog@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ PERL = @PERL@ PGDBG_PATH = @PGDBG_PATH@ PMIRUN_CMD = @PMIRUN_CMD@ PMI_SPAWNER_CFLAGS = @PMI_SPAWNER_CFLAGS@ PMI_SPAWNER_LDFLAGS = @PMI_SPAWNER_LDFLAGS@ PMI_SPAWNER_LIBS = @PMI_SPAWNER_LIBS@ PSTACK_PATH = @PSTACK_PATH@ PTHREADS = @PTHREADS@ PWD_PROG = @PWD_PROG@ RANLIB = @RANLIB@ READLINK = @READLINK@ SEPARATE_CC = @SEPARATE_CC@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ SIZEOF_CHAR = @SIZEOF_CHAR@ SIZEOF_DOUBLE = @SIZEOF_DOUBLE@ SIZEOF_FLOAT = @SIZEOF_FLOAT@ SIZEOF_FLOAT__COMPLEX = @SIZEOF_FLOAT__COMPLEX@ SIZEOF_INT = @SIZEOF_INT@ SIZEOF_LONG = @SIZEOF_LONG@ SIZEOF_LONG_DOUBLE = @SIZEOF_LONG_DOUBLE@ SIZEOF_LONG_LONG = @SIZEOF_LONG_LONG@ SIZEOF_PTRDIFF_T = @SIZEOF_PTRDIFF_T@ SIZEOF_SHORT = @SIZEOF_SHORT@ SIZEOF_SIZE_T = @SIZEOF_SIZE_T@ SIZEOF_VOID_P = @SIZEOF_VOID_P@ SIZEOF__BOOL = @SIZEOF__BOOL@ SMP_LIBS = @SMP_LIBS@ SRUN_PATH = @SRUN_PATH@ SSH_SPAWNER_LIBS = @SSH_SPAWNER_LIBS@ STRIP = @STRIP@ SYSTEM_NAME = @SYSTEM_NAME@ SYSTEM_TUPLE = @SYSTEM_TUPLE@ TIMECMD = @TIMECMD@ TOOL_PREFIX = @TOOL_PREFIX@ TOP_BUILDDIR = @TOP_BUILDDIR@ TOP_SRCDIR = @TOP_SRCDIR@ UCX_CFLAGS = @UCX_CFLAGS@ UCX_LDFLAGS = @UCX_LDFLAGS@ UCX_LIBS = @UCX_LIBS@ UCX_guess_prog = @UCX_guess_prog@ VERSION = @VERSION@ ZE_CFLAGS = @ZE_CFLAGS@ ZE_LDFLAGS = @ZE_LDFLAGS@ ZE_LIBS = @ZE_LIBS@ ZE_guess_prog = @ZE_guess_prog@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ build_cpu = @build_cpu@ build_os = @build_os@ build_vendor = @build_vendor@ builddir = @builddir@ cxxLDFLAGS = @cxxLDFLAGS@ cxxLIBS = @cxxLIBS@ datadir = @datadir@ datarootdir = @datarootdir@ @NEED_DOCDIR_TRUE@docdir = $(datadir)/doc/GASNet docdir = @docdir@ dvidir = @dvidir@ exec_prefix = @exec_prefix@ gasnet_cv__gfp_fullprogname_CC = @gasnet_cv__gfp_fullprogname_CC@ gasnet_cv__gfp_fullprogname_CPP = @gasnet_cv__gfp_fullprogname_CPP@ gasnet_cv__gfp_fullprogname_CXX = @gasnet_cv__gfp_fullprogname_CXX@ gasnet_cv__gfp_fullprogname_CXXCPP = @gasnet_cv__gfp_fullprogname_CXXCPP@ gasnet_cv__gfp_fullprogname_MPIRUN_CMD = @gasnet_cv__gfp_fullprogname_MPIRUN_CMD@ gasnet_cv__gfp_fullprogname_MPI_CC = @gasnet_cv__gfp_fullprogname_MPI_CC@ gasnet_cv__gfp_fullprogname_PMIRUN_CMD = @gasnet_cv__gfp_fullprogname_PMIRUN_CMD@ have_mpcc_r = @have_mpcc_r@ host = @host@ host_alias = @host_alias@ host_cpu = @host_cpu@ host_os = @host_os@ host_vendor = @host_vendor@ htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ pdfdir = @pdfdir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ srcdir = @srcdir@ sysconfdir = @sysconfdir@ target = @target@ target_alias = @target_alias@ target_cpu = @target_cpu@ target_os = @target_os@ target_vendor = @target_vendor@ top_build_prefix = @top_build_prefix@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ AUTOMAKE_OPTIONS = foreign 1.4 ACLOCAL_AMFLAGS = -I other/plpa/config # Directories for automake to recurse into: SUBDIRS = \ config-aux \ other CONDUITMODE_DIST_SUBDIRS = \ mpi-conduit \ smp-conduit \ udp-conduit \ ibv-conduit \ ucx-conduit \ aries-conduit \ ofi-conduit CONDUITMODE_headers = \ gasnetex.h \ gasnet.h \ gasnet_ammacros.h \ gasnet_trace.h \ gasnet_fwd.h \ other/kinds/gasnet_mk.h \ extended-ref/coll/gasnet_coll.h \ extended-ref/ratomic/gasnet_ratomic.h \ extended-ref/vis/gasnet_vis.h CONDUITMODE_EXTRA_DIST = \ docs \ extended-ref \ gasnet_legacy.c \ gasnet_event.c \ gasnet_event_internal.h \ gasnet_handler_internal.h \ gasnet_internal.h \ gasnet_internal.c \ gasnet_am.h \ gasnet_am.c \ gasnet_mmap.c \ gasnet_tm.c \ gasnet_diagnostic.c \ gasnet_pshm.h \ gasnet_pshm.c \ gasnet_syncops.h \ gasnet_trace.c CONDUITMODE_INSTALL_DOCS = \ docs/memory_kinds.pdf \ docs/memory_kinds_implementation.md \ docs/implementation_defined.md \ docs/gasnet1_differences.md \ docs/GASNet-EX.txt # GASNET_TOOLSONLY_FALSE_END # bug3285: Order matters here: other should follow conduits to maintain dependencies for distclean DIST_SUBDIRS = $(CONDUITMODE_DIST_SUBDIRS) $(SUBDIRS) configdir = $(includedir) config_DATA = $(CONFIG_HEADER) headers = \ $(CONDUITMODE_headers) \ gasnet_asm.h \ gasnet_atomicops.h \ gasnet_atomic_bits.h \ gasnet_atomic_fwd.h \ gasnet_basic.h \ gasnet_help.h \ gasnet_membar.h \ gasnet_timer.h \ gasnet_tools.h \ gasnet_toolhelp.h EXTRA_DIST = \ $(CONDUITMODE_EXTRA_DIST) \ README \ README-tools \ ChangeLog \ license.txt \ .autom4te.cfg \ Bootstrap \ unBootstrap \ configure.in \ acconfig.h \ acinclude.m4 \ gasnet_tools.c # tests handled below include_HEADERS = $(headers) # deliberately omitted git-only docs: README-devel README-git README-release gasnet.* INSTALL_DOCS = \ $(CONDUITMODE_INSTALL_DOCS) \ README \ README-tools \ license.txt #------------------------------------------------------- # libgasnet_tools goop @BUILD_SEQ_LIBS_TRUE@libgasnet_tools_seq_a_SOURCES = @BUILD_SEQ_LIBS_TRUE@libraries_seq = libgasnet_tools-seq.a @BUILD_SEQ_LIBS_TRUE@fragments_seq = gasnet_tools-seq.mak @BUILD_SEQ_LIBS_TRUE@pkgconfig_seq = gasnet_tools-seq.pc @BUILD_PAR_LIBS_TRUE@libgasnet_tools_par_a_SOURCES = @BUILD_PAR_LIBS_TRUE@libraries_par = libgasnet_tools-par.a @BUILD_PAR_LIBS_TRUE@fragments_par = gasnet_tools-par.mak @BUILD_PAR_LIBS_TRUE@pkgconfig_par = gasnet_tools-par.pc libraries = $(libraries_seq) $(libraries_par) fragments = $(fragments_seq) $(fragments_par) pkgconfig = $(pkgconfig_seq) $(pkgconfig_par) lib_LIBRARIES = $(libraries) @CONDUIT_MODE_TRUE@TESTINSTANCE = $${PPID:-xxxx} @CONDUIT_MODE_TRUE@TESTLOG = `pwd`/.test-results @CONDUIT_MODE_TRUE@RUN_TEST_TARGETS = \ @CONDUIT_MODE_TRUE@ run-tests run-tests-seq run-tests-parsync run-tests-par \ @CONDUIT_MODE_TRUE@ run-tests-installed-seq run-tests-installed-parsync run-tests-installed-par @CONDUIT_MODE_FALSE@CLEANFILES = $(TOOLSONLY_TESTS) @CONDUIT_MODE_TRUE@CLEANFILES = $(TESTLOG) @CONDUIT_MODE_FALSE@TOOLSONLY_CHECK = run-tests @CONDUIT_MODE_FALSE@TOOLSONLY_TESTS = testtools # Build, clean, install, uninstall, etc. the conduits - in parallel if possible. # Instead of automake's loop over subdir, we expand to one target per subdir. # Care is taken w/ the 'clean-local' rule in case distclean has wiped the # local or conduit Makefiles # Note that if ($VAR:%=%FOO) doesn't work for a given make, then we are # reduced to using actual conduit names as PHONY targets, but the rule for # $(recurse_local) is tailored to work correctly regardless. recurse_local = $(CONDUITS:%=%-recurse) recurse_local_dummy # conduit subdirectories that should be made, even when the conduit is disabled SPECIAL_SUBDIRS = mpi-conduit/contrib @TOOLSONLY_MODE_FALSE@TESTDIST = `find . -print | grep -v ^./mpi` @TOOLSONLY_MODE_TRUE@TESTDIST = README testtools.c test.h Makefile.in @TOOLSONLY_MODE_FALSE@GIT_DESCRIBE_DIRTY = --dirty # A tools-only git clone is *always* dirty, but we don't want to see the # string '-dirty' in version info of distributed tarballs and resuting installs. @TOOLSONLY_MODE_TRUE@GIT_DESCRIBE_DIRTY = @USE_PSHM_FALSE@PSHM_CONFIG_FLAG = # If we've enabled PSHM, also enabled for 'make distcheck' @USE_PSHM_TRUE@PSHM_CONFIG_FLAG = --enable-pshm DISTCHECK_CONFIGURE_FLAGS = $(PSHM_CONFIG_FLAG) all: gasnet_config.h $(MAKE) $(AM_MAKEFLAGS) all-recursive .SUFFIXES: am--refresh: Makefile @: $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \ $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \ && exit 0; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --foreign Makefile $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) $(SHELL) ./config.status --recheck $(top_srcdir)/configure: $(am__configure_deps) $(am__cd) $(srcdir) && $(AUTOCONF) $(ACLOCAL_M4): $(am__aclocal_m4_deps) $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) $(am__aclocal_m4_deps): gasnet_config.h: stamp-h1 @test -f $@ || rm -f stamp-h1 @test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1 stamp-h1: $(srcdir)/gasnet_config.h.in $(top_builddir)/config.status @rm -f stamp-h1 cd $(top_builddir) && $(SHELL) ./config.status gasnet_config.h $(srcdir)/gasnet_config.h.in: $(am__configure_deps) $(top_srcdir)/acconfig.h ($(am__cd) $(top_srcdir) && $(AUTOHEADER)) rm -f stamp-h1 touch $@ distclean-hdr: -rm -f gasnet_config.h stamp-h1 tests/Makefile: $(top_builddir)/config.status $(top_srcdir)/tests/Makefile.in cd $(top_builddir) && $(SHELL) ./config.status $@ install-libLIBRARIES: $(lib_LIBRARIES) @$(NORMAL_INSTALL) @list='$(lib_LIBRARIES)'; test -n "$(libdir)" || list=; \ list2=; for p in $$list; do \ if test -f $$p; then \ list2="$$list2 $$p"; \ else :; fi; \ done; \ test -z "$$list2" || { \ echo " $(MKDIR_P) '$(DESTDIR)$(libdir)'"; \ $(MKDIR_P) "$(DESTDIR)$(libdir)" || exit 1; \ echo " $(INSTALL_DATA) $$list2 '$(DESTDIR)$(libdir)'"; \ $(INSTALL_DATA) $$list2 "$(DESTDIR)$(libdir)" || exit $$?; } @$(POST_INSTALL) @list='$(lib_LIBRARIES)'; test -n "$(libdir)" || list=; \ for p in $$list; do \ if test -f $$p; then \ $(am__strip_dir) \ echo " ( cd '$(DESTDIR)$(libdir)' && $(RANLIB) $$f )"; \ ( cd "$(DESTDIR)$(libdir)" && $(RANLIB) $$f ) || exit $$?; \ else :; fi; \ done uninstall-libLIBRARIES: @$(NORMAL_UNINSTALL) @list='$(lib_LIBRARIES)'; test -n "$(libdir)" || list=; \ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ dir='$(DESTDIR)$(libdir)'; $(am__uninstall_files_from_dir) clean-libLIBRARIES: -test -z "$(lib_LIBRARIES)" || rm -f $(lib_LIBRARIES) mostlyclean-compile: -rm -f *.$(OBJEXT) distclean-compile: -rm -f *.tab.c install-configDATA: $(config_DATA) @$(NORMAL_INSTALL) @list='$(config_DATA)'; test -n "$(configdir)" || list=; \ if test -n "$$list"; then \ echo " $(MKDIR_P) '$(DESTDIR)$(configdir)'"; \ $(MKDIR_P) "$(DESTDIR)$(configdir)" || exit 1; \ fi; \ for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ echo "$$d$$p"; \ done | $(am__base_list) | \ while read files; do \ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(configdir)'"; \ $(INSTALL_DATA) $$files "$(DESTDIR)$(configdir)" || exit $$?; \ done uninstall-configDATA: @$(NORMAL_UNINSTALL) @list='$(config_DATA)'; test -n "$(configdir)" || list=; \ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ dir='$(DESTDIR)$(configdir)'; $(am__uninstall_files_from_dir) install-includeHEADERS: $(include_HEADERS) @$(NORMAL_INSTALL) @list='$(include_HEADERS)'; test -n "$(includedir)" || list=; \ if test -n "$$list"; then \ echo " $(MKDIR_P) '$(DESTDIR)$(includedir)'"; \ $(MKDIR_P) "$(DESTDIR)$(includedir)" || exit 1; \ fi; \ for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ echo "$$d$$p"; \ done | $(am__base_list) | \ while read files; do \ echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(includedir)'"; \ $(INSTALL_HEADER) $$files "$(DESTDIR)$(includedir)" || exit $$?; \ done uninstall-includeHEADERS: @$(NORMAL_UNINSTALL) @list='$(include_HEADERS)'; test -n "$(includedir)" || list=; \ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ dir='$(DESTDIR)$(includedir)'; $(am__uninstall_files_from_dir) # This directory's subdirectories are mostly independent; you can cd # into them and run 'make' without going through this Makefile. # To change the values of 'make' variables: instead of editing Makefiles, # (1) if the variable is set in 'config.status', edit 'config.status' # (which will cause the Makefiles to be regenerated when you run 'make'); # (2) otherwise, pass the desired values on the 'make' command line. $(am__recursive_targets): @fail=; \ if $(am__make_keepgoing); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo $@ | sed s/-recursive//`; \ case "$@" in \ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ *) list='$(SUBDIRS)' ;; \ esac; \ for subdir in $$list; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ dot_seen=yes; \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || eval $$failcom; \ done; \ if test "$$dot_seen" = "no"; then \ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ fi; test -z "$$fail" ID: $(am__tagged_files) $(am__define_uniq_tagged_files); mkid -fID $$unique tags: tags-recursive TAGS: tags tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) set x; \ here=`pwd`; \ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ include_option=--etags-include; \ empty_fix=.; \ else \ include_option=--include; \ empty_fix=; \ fi; \ list='$(SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test ! -f $$subdir/TAGS || \ set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ fi; \ done; \ $(am__define_uniq_tagged_files); \ shift; \ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ if test $$# -gt 0; then \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ "$$@" $$unique; \ else \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ $$unique; \ fi; \ fi ctags: ctags-recursive CTAGS: ctags ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) $(am__define_uniq_tagged_files); \ test -z "$(CTAGS_ARGS)$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ && $(am__cd) $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) "$$here" cscope: cscope.files test ! -s cscope.files \ || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS) clean-cscope: -rm -f cscope.files cscope.files: clean-cscope cscopelist cscopelist: cscopelist-recursive cscopelist-am: $(am__tagged_files) list='$(am__tagged_files)'; \ case "$(srcdir)" in \ [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ *) sdir=$(subdir)/$(srcdir) ;; \ esac; \ for i in $$list; do \ if test -f "$$i"; then \ echo "$(subdir)/$$i"; \ else \ echo "$$sdir/$$i"; \ fi; \ done >> $(top_builddir)/cscope.files distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags -rm -f cscope.out cscope.in.out cscope.po.out cscope.files distdir: $(BUILT_SOURCES) $(MAKE) $(AM_MAKEFLAGS) distdir-am distdir-am: $(DISTFILES) $(am__remove_distdir) test -d "$(distdir)" || mkdir "$(distdir)" @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ dist_files=`for file in $$list; do echo $$file; done | \ sed -e "s|^$$srcdirstrip/||;t" \ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ case $$dist_files in \ */*) $(MKDIR_P) `echo "$$dist_files" | \ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ sort -u` ;; \ esac; \ for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ if test -d "$(distdir)/$$file"; then \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ test -f "$(distdir)/$$file" \ || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ $(am__make_dryrun) \ || test -d "$(distdir)/$$subdir" \ || $(MKDIR_P) "$(distdir)/$$subdir" \ || exit 1; \ dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ $(am__relativize); \ new_distdir=$$reldir; \ dir1=$$subdir; dir2="$(top_distdir)"; \ $(am__relativize); \ new_top_distdir=$$reldir; \ echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ ($(am__cd) $$subdir && \ $(MAKE) $(AM_MAKEFLAGS) \ top_distdir="$$new_top_distdir" \ distdir="$$new_distdir" \ am__remove_distdir=: \ am__skip_length_check=: \ am__skip_mode_fix=: \ distdir) \ || exit 1; \ fi; \ done $(MAKE) $(AM_MAKEFLAGS) \ top_distdir="$(top_distdir)" distdir="$(distdir)" \ dist-hook -test -n "$(am__skip_mode_fix)" \ || find "$(distdir)" -type d ! -perm -755 \ -exec chmod u+rwx,go+rx {} \; -o \ ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \ || chmod -R a+r "$(distdir)" dist-gzip: distdir tardir=$(distdir) && $(am__tar) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).tar.gz $(am__post_remove_distdir) dist-bzip2: distdir tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2 $(am__post_remove_distdir) dist-lzip: distdir tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz $(am__post_remove_distdir) dist-xz: distdir tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz $(am__post_remove_distdir) dist-zstd: distdir tardir=$(distdir) && $(am__tar) | zstd -c $${ZSTD_CLEVEL-$${ZSTD_OPT--19}} >$(distdir).tar.zst $(am__post_remove_distdir) dist-tarZ: distdir @echo WARNING: "Support for distribution archives compressed with" \ "legacy program 'compress' is deprecated." >&2 @echo WARNING: "It will be removed altogether in Automake 2.0" >&2 tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z $(am__post_remove_distdir) dist-shar: distdir @echo WARNING: "Support for shar distribution archives is" \ "deprecated." >&2 @echo WARNING: "It will be removed altogether in Automake 2.0" >&2 shar $(distdir) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).shar.gz $(am__post_remove_distdir) dist-zip: distdir -rm -f $(distdir).zip zip -rq $(distdir).zip $(distdir) $(am__post_remove_distdir) dist dist-all: $(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:' $(am__post_remove_distdir) # This target untars the dist file and tries a VPATH configuration. Then # it guarantees that the distribution is self-contained by making another # tarfile. distcheck: dist case '$(DIST_ARCHIVES)' in \ *.tar.gz*) \ eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).tar.gz | $(am__untar) ;;\ *.tar.bz2*) \ bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\ *.tar.lz*) \ lzip -dc $(distdir).tar.lz | $(am__untar) ;;\ *.tar.xz*) \ xz -dc $(distdir).tar.xz | $(am__untar) ;;\ *.tar.Z*) \ uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ *.shar.gz*) \ eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).shar.gz | unshar ;;\ *.zip*) \ unzip $(distdir).zip ;;\ *.tar.zst*) \ zstd -dc $(distdir).tar.zst | $(am__untar) ;;\ esac chmod -R a-w $(distdir) chmod u+w $(distdir) mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst chmod a-w $(distdir) test -d $(distdir)/_build || exit 0; \ dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ && am__cwd=`pwd` \ && $(am__cd) $(distdir)/_build/sub \ && ../../configure \ $(AM_DISTCHECK_CONFIGURE_FLAGS) \ $(DISTCHECK_CONFIGURE_FLAGS) \ --srcdir=../.. --prefix="$$dc_install_base" \ && $(MAKE) $(AM_MAKEFLAGS) \ && $(MAKE) $(AM_MAKEFLAGS) dvi \ && $(MAKE) $(AM_MAKEFLAGS) check \ && $(MAKE) $(AM_MAKEFLAGS) install \ && $(MAKE) $(AM_MAKEFLAGS) installcheck \ && $(MAKE) $(AM_MAKEFLAGS) uninstall \ && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \ distuninstallcheck \ && chmod -R a-w "$$dc_install_base" \ && ({ \ (cd ../.. && umask 077 && mkdir "$$dc_destdir") \ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \ distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \ } || { rm -rf "$$dc_destdir"; exit 1; }) \ && rm -rf "$$dc_destdir" \ && $(MAKE) $(AM_MAKEFLAGS) dist \ && rm -rf $(DIST_ARCHIVES) \ && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \ && cd "$$am__cwd" \ || exit 1 $(am__post_remove_distdir) @(echo "$(distdir) archives ready for distribution: "; \ list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x' distuninstallcheck: @test -n '$(distuninstallcheck_dir)' || { \ echo 'ERROR: trying to run $@ with an empty' \ '$$(distuninstallcheck_dir)' >&2; \ exit 1; \ }; \ $(am__cd) '$(distuninstallcheck_dir)' || { \ echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \ exit 1; \ }; \ test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \ || { echo "ERROR: files left after uninstall:" ; \ if test -n "$(DESTDIR)"; then \ echo " (check DESTDIR support)"; \ fi ; \ $(distuninstallcheck_listfiles) ; \ exit 1; } >&2 distcleancheck: distclean @if test '$(srcdir)' = . ; then \ echo "ERROR: distcleancheck can only run from a VPATH build" ; \ exit 1 ; \ fi @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \ || { echo "ERROR: files left in build directory after distclean:" ; \ $(distcleancheck_listfiles) ; \ exit 1; } >&2 check-am: all-am $(MAKE) $(AM_MAKEFLAGS) check-local check: check-recursive all-am: Makefile $(LIBRARIES) $(DATA) $(HEADERS) gasnet_config.h \ all-local installdirs: installdirs-recursive installdirs-am: for dir in "$(DESTDIR)$(libdir)" "$(DESTDIR)$(configdir)" "$(DESTDIR)$(includedir)"; do \ test -z "$$dir" || $(MKDIR_P) "$$dir"; \ done install: install-recursive install-exec: install-exec-recursive install-data: install-data-recursive uninstall: uninstall-recursive install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-recursive install-strip: if test -z '$(STRIP)'; then \ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ install; \ else \ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ fi mostlyclean-generic: clean-generic: -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." @CONDUIT_MODE_FALSE@installcheck-local: clean: clean-recursive clean-am: clean-generic clean-libLIBRARIES clean-local mostlyclean-am distclean-am: clean-am distclean-compile distclean-generic \ distclean-hdr distclean-tags dvi: dvi-recursive dvi-am: html: html-recursive html-am: info: info-recursive info-am: install-data-am: install-configDATA install-data-local \ install-includeHEADERS install-dvi: install-dvi-recursive install-dvi-am: install-exec-am: install-exec-local install-libLIBRARIES install-html: install-html-recursive install-html-am: install-info: install-info-recursive install-info-am: install-man: install-pdf: install-pdf-recursive install-pdf-am: install-ps: install-ps-recursive install-ps-am: installcheck-am: installcheck-local maintainer-clean: maintainer-clean-recursive -rm -f $(am__CONFIG_DISTCLEAN_FILES) -rm -rf $(top_srcdir)/autom4te.cache -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-recursive mostlyclean-am: mostlyclean-compile mostlyclean-generic pdf: pdf-recursive pdf-am: ps: ps-recursive ps-am: uninstall-am: uninstall-configDATA uninstall-includeHEADERS \ uninstall-libLIBRARIES uninstall-local .MAKE: $(am__recursive_targets) all check-am install-am install-strip .PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am all-local \ am--refresh check check-am check-local clean clean-cscope \ clean-generic clean-libLIBRARIES clean-local cscope \ cscopelist-am ctags ctags-am dist dist-all dist-bzip2 \ dist-gzip dist-hook dist-lzip dist-shar dist-tarZ dist-xz \ dist-zip dist-zstd distcheck distclean distclean-compile \ distclean-generic distclean-hdr distclean-tags distcleancheck \ distdir distuninstallcheck dvi dvi-am html html-am info \ info-am install install-am install-configDATA install-data \ install-data-am install-data-local install-dvi install-dvi-am \ install-exec install-exec-am install-exec-local install-html \ install-html-am install-includeHEADERS install-info \ install-info-am install-libLIBRARIES install-man install-pdf \ install-pdf-am install-ps install-ps-am install-strip \ installcheck installcheck-am installcheck-local installdirs \ installdirs-am maintainer-clean maintainer-clean-generic \ mostlyclean mostlyclean-compile mostlyclean-generic pdf pdf-am \ ps ps-am tags tags-am uninstall uninstall-am \ uninstall-configDATA uninstall-includeHEADERS \ uninstall-libLIBRARIES uninstall-local .PRECIOUS: Makefile # GASNET_TOOLSONLY_TRUE_BEGIN # CONDUITMODE_DIST_SUBDIRS = # CONDUITMODE_headers = # CONDUITMODE_EXTRA_DIST = .gasnet_toolsonly_mode # CONDUITMODE_INSTALL_DOCS = # GASNET_TOOLSONLY_TRUE_END # GASNET_TOOLSONLY_FALSE_BEGIN # Directories we manually recurse into: force: # leading - prevents distclean failures -include $(top_builddir)/other/Makefile-libgasnet.mak libgasnet_tools-seq.a: $(libgasnet_tools_dependencies) @$(MAKE) do-libgasnet_tools-seq libgasnet_tools-par.a: $(libgasnet_tools_dependencies) @$(MAKE) do-libgasnet_tools-par #------------------------------------------------------- # bug1758: cannot depend on $(top_builddir)/other/Makefile-libgasnet.mak here, # as that will cause a failure during distclean on some make versions # make should automatically introduce the desired dependency on Makefile-libgasnet.mak.in # due to the include operation above Makefile: $(srcdir)/Makefile.in cd $(top_builddir) && CONFIG_FILES=$@ CONFIG_HEADERS= ./config.status # echo an arbitrary make/environment variable echovar: force @echo $(VARNAME)=\"$($(VARNAME))\" @CONDUIT_MODE_TRUE@@BUILD_PAR_LIBS_TRUE@ DEFAULT_TEST_MODE=par @CONDUIT_MODE_TRUE@@BUILD_PAR_LIBS_FALSE@ DEFAULT_TEST_MODE=seq @CONDUIT_MODE_TRUE@test: tests-$(DEFAULT_TEST_MODE) @CONDUIT_MODE_TRUE@tests: tests-$(DEFAULT_TEST_MODE) @CONDUIT_MODE_TRUE@tests-installed: tests-installed-$(DEFAULT_TEST_MODE) # automake name, used by distcheck: @CONDUIT_MODE_TRUE@installcheck-local: tests-installed-$(DEFAULT_TEST_MODE) # xSDK alias: @CONDUIT_MODE_TRUE@test_install: run-tests-installed-$(DEFAULT_TEST_MODE) @CONDUIT_MODE_TRUE@other-tests: @CONDUIT_MODE_TRUE@ @cd $(top_builddir)/other && $(MAKE) all tests @CONDUIT_MODE_TRUE@tests-seq tests-parsync tests-par tests-installed-seq tests-installed-par tests-installed-parsync: other-tests @CONDUIT_MODE_TRUE@ @for conduit in $(CONDUITS) ; do \ @CONDUIT_MODE_TRUE@ ( cd "$(top_builddir)/$$conduit-conduit" && $(MAKE) $@ ) || exit $$?; \ @CONDUIT_MODE_TRUE@ done @CONDUIT_MODE_TRUE@$(RUN_TEST_TARGETS): do-begin-tests @CONDUIT_MODE_TRUE@ @testinst=$(TESTINSTANCE) ; \ @CONDUIT_MODE_TRUE@ testlog=$(TESTLOG) ; \ @CONDUIT_MODE_TRUE@ err=0 ; \ @CONDUIT_MODE_TRUE@ for conduit in $(CONDUITS) ; do \ @CONDUIT_MODE_TRUE@ ( cd "$(top_builddir)/$$conduit-conduit" && \ @CONDUIT_MODE_TRUE@ $(MAKE) TESTINSTANCE=$$testinst TESTLOG=$$testlog \ @CONDUIT_MODE_TRUE@ TESTLOG_INHERIT=1 $@ ) || err=$$? ; \ @CONDUIT_MODE_TRUE@ if test "$$err" != "0" ; then \ @CONDUIT_MODE_TRUE@ echo " *-* COMPILE FAILURE: $$conduit-conduit $@ *-*" >> $(TESTLOG) ; \ @CONDUIT_MODE_TRUE@ break ; \ @CONDUIT_MODE_TRUE@ fi ; \ @CONDUIT_MODE_TRUE@ done ; \ @CONDUIT_MODE_TRUE@ if test "$$err" = "0" ; then \ @CONDUIT_MODE_TRUE@ ( cd $(top_builddir)/other && \ @CONDUIT_MODE_TRUE@ $(MAKE) TESTINSTANCE=$$testinst TESTLOG=$$testlog \ @CONDUIT_MODE_TRUE@ TESTLOG_INHERIT=1 run-tests ) || err=$$? ; \ @CONDUIT_MODE_TRUE@ fi ; \ @CONDUIT_MODE_TRUE@ $(MAKE) TESTINSTANCE=$(TESTINSTANCE) TESTLOG=$(TESTLOG) do-end-tests ; \ @CONDUIT_MODE_TRUE@ exit $$err @CONDUIT_MODE_TRUE@do-begin-tests: @CONDUIT_MODE_TRUE@ @testinst=$(TESTINSTANCE) ; \ @CONDUIT_MODE_TRUE@ testlog=$(TESTLOG) ; \ @CONDUIT_MODE_TRUE@ if test "`sed 1q $$testlog 2> /dev/null`" != "$$testinst" ; then \ @CONDUIT_MODE_TRUE@ echo "$$testinst" > $$testlog ; \ @CONDUIT_MODE_TRUE@ echo Starting a new test instance, log=$$testlog ; \ @CONDUIT_MODE_TRUE@ fi @CONDUIT_MODE_TRUE@do-end-tests: @CONDUIT_MODE_TRUE@ @testinst=$(TESTINSTANCE) ; \ @CONDUIT_MODE_TRUE@ testlog=$(TESTLOG) ; \ @CONDUIT_MODE_TRUE@ if test "`sed 1q $$testlog 2> /dev/null`" = "$$testinst" ; then \ @CONDUIT_MODE_TRUE@ line='+++++++++++++++++++++++++++++++++++++++' ; line="$$line$$line" ; \ @CONDUIT_MODE_TRUE@ echo "$$line" ; \ @CONDUIT_MODE_TRUE@ echo Test results: `sed -n '1d;/\*-\*/p' $$testlog | wc -l` failures ; \ @CONDUIT_MODE_TRUE@ sed 1d $$testlog ; \ @CONDUIT_MODE_TRUE@ echo "$$line" ; \ @CONDUIT_MODE_TRUE@ fi @CONDUIT_MODE_FALSE@test: tests @CONDUIT_MODE_FALSE@tests: $(TOOLSONLY_TESTS) @CONDUIT_MODE_FALSE@$(TOOLSONLY_TESTS): force @CONDUIT_MODE_FALSE@ @$(MAKE) -f $(top_builddir)/tests/Makefile \ @CONDUIT_MODE_FALSE@ GASNET_INCLUDES="-I@TOP_BUILDDIR@ -I@TOP_SRCDIR@ -I@TOP_SRCDIR@/other" \ @CONDUIT_MODE_FALSE@ $@ @CONDUIT_MODE_FALSE@run-tests: tests @CONDUIT_MODE_FALSE@ ./testtools $(recurse_local): @if test "$@" != "recurse_local_dummy" ; then \ cd `echo $@ | sed s/-recurse//`-conduit && $(MAKE) $(DO_WHAT) || exit $$? ; \ fi recurse_special: @for dir in $(SPECIAL_SUBDIRS) ; do \ if test -f $$dir/Makefile ; then \ cd $$dir && $(MAKE) $(DO_WHAT) || exit $$? ; \ fi ; \ done all-local: $(lib_LIBRARIES) $(fragments) $(pkgconfig) @$(MAKE) $(recurse_local) DO_WHAT=$${DO_WHAT=all} @$(MAKE) recurse_special DO_WHAT=$${DO_WHAT=all} clean-local: rm -f $(fragments) $(pkgconfig) @if test -f Makefile -a -f smp-conduit/Makefile; then \ $(MAKE) $(recurse_local) DO_WHAT=clean || exit $$? ; \ fi @if test -f Makefile; then \ $(MAKE) recurse_special DO_WHAT=clean ; \ fi check-local: check-exports $(TOOLSONLY_CHECK) $(MAKE) check-pkgconfig CHECK_FILES="$(pkgconfig)" seq par parsync: @$(MAKE) $(recurse_local) DO_WHAT=$@ check tests-clean: @$(MAKE) $(recurse_local) DO_WHAT=$@ @cd "$(top_builddir)/other" && $(MAKE) $@ install-data-local: @if test -n "$(DESTDIR)" -a `expr "X$(DESTDIR)" : X/` = 0; then \ echo "ERROR: \$$DESTDIR must begin with a '/' character."; \ exit 1; \ fi @if test `expr "X$(prefix)" : X/` = 0; then \ echo "ERROR: \$$prefix must begin with a '/' character."; \ exit 1; \ fi @$(MAKE) $(recurse_local) DO_WHAT=install-data @$(MAKE) recurse_special DO_WHAT=install-data $(mkinstalldirs) $(DESTDIR)$(docdir) if test -f $(top_srcdir)/version.git ; then \ $(INSTALL_DATA) $(top_srcdir)/version.git $(DESTDIR)$(docdir)/version.git || exit $$? ; \ fi if test -f $(top_srcdir)/extended-ref/README ; then \ $(INSTALL_DATA) $(top_srcdir)/extended-ref/README $(DESTDIR)$(docdir)/README-extref || exit $$? ; \ fi @: Automake 1.4 correct handling of headers given by relative path: ensure nested ext-ref headers get correctly installed in top-level include @for file in $(include_HEADERS) ; do \ if test -f "$(srcdir)/$$file" ; then ( b=`basename $$file` ; set -x ; \ $(INSTALL_DATA) "$(srcdir)/$$file" "$(DESTDIR)$(includedir)/$$b" ) || exit $$?; \ fi; \ done for file in $(INSTALL_DOCS) ; do \ $(INSTALL_DATA) $(top_srcdir)/$$file $(DESTDIR)$(docdir)/`basename $$file` || exit $$? ; \ done $(mkinstalldirs) $(DESTDIR)$(libdir)/pkgconfig @list='$(fragments)'; for p in $$list; do \ if test -f $$p; then \ filename=`basename $$p`; \ destmak="$(DESTDIR)$(includedir)/$$filename"; \ echo @GASNET_INSTALL_CMD@ " < $$p > $$destmak"; \ @GASNET_INSTALL_CMD@ < $$p > $$destmak || exit $$? ; \ thread_model=`echo "$$filename" | sed 's/^.*-\(.*\)\.mak$$/\1/'` ; \ destpc="$(DESTDIR)$(libdir)/pkgconfig/gasnet_tools-$$thread_model.pc"; \ $(MAKE) do-pkgconfig-tools thread_model=$$thread_model pkgconfig_file="$$destpc" FRAGMENT="$$destmak" || exit $$? ; \ chmod 644 "$$destpc" || exit $$? ; \ else :; fi; \ done install-exec-local: @if test -n "$(DESTDIR)" -a `expr "X$(DESTDIR)" : X/` = 0; then \ echo "ERROR: \$$DESTDIR must begin with a '/' character."; \ exit 1; \ fi @if test `expr "X$(prefix)" : X/` = 0; then \ echo "ERROR: \$$prefix must begin with a '/' character."; \ exit 1; \ fi @$(MAKE) $(recurse_local) DO_WHAT=install-exec @$(MAKE) recurse_special DO_WHAT=install-exec uninstall-local: @if test -n "$(DESTDIR)" -a `expr "X$(DESTDIR)" : X/` = 0; then \ echo "ERROR: \$$DESTDIR must begin with a '/' character."; \ exit 1; \ fi @if test `expr "X$(prefix)" : X/` = 0; then \ echo "ERROR: \$$prefix must begin with a '/' character."; \ exit 1; \ fi @$(MAKE) $(recurse_local) DO_WHAT=uninstall @$(MAKE) recurse_special DO_WHAT=uninstall rm -Rf $(DESTDIR)$(docdir) for file in $(fragments) ; do \ rm -f $(DESTDIR)$(includedir)/$$file ; \ done rm -f $(DESTDIR)$(libdir)/pkgconfig/gasnet_tools-*.pc # Bug3285: the behavior of distclean-recursive varies in incompatible ways # across automake versions, such that no matter what variables we specify # some versions will break the dependencies between subdirectories. # Very early automakes ignore DIST_SUBDIRS entirely. # We override it with our own top-level rule to ensure consistent ordering. distclean: force @for dir in $(DIST_SUBDIRS); do \ if test -f "$$dir/Makefile"; then \ ( cd "$$dir" && $(MAKE) distclean ) || exit 1; \ fi; \ done $(MAKE) recurse_special DO_WHAT=distclean $(MAKE) $(AM_MAKEFLAGS) distclean-am rm -f tests/Makefile rm -f $(am__CONFIG_DISTCLEAN_FILES) rm -f config.status gasnet_config.h stamp-h1 rm -f Makefile .PHONY: force tests test do-begin-tests do-end-tests \ other-tests other-run-tests tests-seq tests-par tests-parsync \ run-tests-seq run-tests-par run-tests-parsync \ recurse_special $(recurse_local) dist-hook: @if grep -q 'cache_file=/dev/null' $(srcdir)/configure; then \ echo ERROR: Refusing to distribute configure not generated by Bootstrap. Please start with a clean source tree and Bootstrap. ; \ exit 1 ; \ fi if test -d $(srcdir)/.git ; then \ GASNET_DESC=`( cd $(srcdir) && $${GIT=git} describe --long --always $(GIT_DESCRIBE_DIRTY) ) 2>/dev/null | head -n 1`; \ if test -z "$$GASNET_DESC"; then \ echo 'Use of git describe failed even though .git exists' 1>&2; \ exit 1; \ fi; \ $(PERL) -pi -e "s:no-version-control-info:$$GASNET_DESC:;" -- $(distdir)/configure || exit $$? ; \ echo $$GASNET_DESC > $(distdir)/version.git || exit $$? ; \ fi if test -f $(distdir)/docs/Makefile ; then \ cd $(distdir)/docs && $(MAKE) dist-hook || exit $$? ; \ fi mkdir -p $(distdir)/tests # need this special hack to handle tests or distcheck will fail fulldistdir=`cd $(distdir) ; @PWD_PROG@` export fulldistdir ; \ cd $(srcdir)/tests ; for file in $(TESTDIST) ; do \ if test -d $$file -a ! -d $$fulldistdir/tests/$$file ; then \ mkdir -p $$fulldistdir/tests/$$file || exit $$? ; \ fi; \ if test -f $$file -a ! -f $$fulldistdir/tests/$$file ; then \ cp -p $$file $$fulldistdir/tests/$$file || exit $$? ; \ fi ; \ done # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: